Saturday 22 September 2012


Fresh RED SCALE 35mm Negative LOMO Films for sale. Made from fresh Kodak ColorPlus 200 35mm negative film. Expiry date is on 12/2013. C-41 process. Expires 03/2014.

PRICE PER ROLL: RM 20.00 FREE SHIPPING WITHIN MALAYSIA.

For more useful techniques on how to shoot Red Scale Films, please refer http://www.flickr.com/photos/xabl/3460022608/







                                                           

Redscale is the name given to a technique of shooting photographic film where the film is exposed from the wrong side, i.e. the emulsion is exposed through the base of the film. Normally, this is done by winding the film upside-down into an empty film canister. The name "redscale" comes because there is a strong color shift to red due to the red-sensitive layer of the film being exposed first, rather than last (the red layer is normally the bottom layer in C-41 (color print) film). All layers are sensitive to blue light, so normally the blue layer is on top, followed by a filter. In this technique, blue light exposes the layers containing red and green dyes, but the layer containing blue dye is left unexposed due to the filter. E-6 (color slide) film has also been used for this technique.

Image created using the redscale technique with Kodak MAX 400 film.
Depending on the type of film used, the resulting colors seem to range from maroon, to red, to orange, to yellow.
The technique seems to have been discovered accidentally. Some people shooting large format color film would load the individual negatives backwards. This phenomenon is likely as old as color film itself. However, it has only recently gained popularity as an effect intentionally sought.
The technique is considered by some to be part of the lo-fi photography movement, along with use of toy cameraspinhole camerasinstant cameras, and sprocket hole photography.
The Lomographic Society International has produced a pre-loaded redscale 35mm film, that will fit in all standard 35mm cameras. Because of the nature of the film, shots need to be over exposed by one or two stops to achieve correct exposure on developing.








                                      
                               

No comments:

Post a Comment